43 Amazing Entertainment Center Ideas

Whether or not you’re staging your house to be offered or simply settling into a brand new area, curating an inviting lounge environment is vital. One of many greatest adorning challenges People face right now is hiding the wires, accent consoles and harsh silhouettes of electronics. However you may seamlessly combine know-how into your cozy lounge by framing your system with the relaxed texture of shiplap to steadiness out that chilly manufactured feeling and add curiosity to your area.

The blackness of a TV typically seems to be stark towards partitions, so including a darkish background behind it helps to masks that. I selected to color my DIY shiplap floating leisure heart a deep charcoal so the TV and its consoles would mix in with it. The feel of the shiplap and the additional area above the TV guides the attention to one thing apart from the electronics to create a cozier area. Right here’s how one can construct your individual floating leisure heart.

Figuring out Dimension

Resolve the place you need to set up your wall-mounted unit and the way huge will probably be. Hanging it close to an outlet and your cable jack is a useful option to preserve all the things related with out an excessive amount of fuss. As for dimension, that may rely in your area. Go away some room across the shiplap itself, so it doesn’t overwhelm the wall. The ultimate measurement of the piece I’ve created round our 29” TV is Four ft extensive by 52 ¾ inches tall. If your required dimension differs from mine, you’ll in all probability want kind of wooden.


  • Cordless energy drill
  • Random orbital sander
  • Sliding miter noticed
  • 1” x eight” x eight’ Premium Jap White Pine Shiplap Three-piece field
  • 1” x 12” x eight’ pine board
  • 1”x 12” x 10’ pine board
  • 2 ½” cupboard screws
  • 2” wooden screws
  • Small utility hinges
  • Magnetic cupboard catch
  • 1 ½” spade or a Forstner bit (the outlet must be simply greater than the plugs you’re placing by it)
  • 1” spade or Forstner bit (for the finger gap on the door)
  • Countersink bit
  • Tape measure
  • Chalk line (painter’s tape would work, too)
  • Stud finder
  • Painter’s tape
  • Wooden glue
  • Clamps (elective)
  • Pencil
  • Degree
  • Your alternative of paint (knots could bleed by, so when you’re portray it a light-weight shade you’ll need to use an ideal primer to forestall this. I used a paint/primer combo for ours)
  • Paint curler
  • Small paint brush
  • Energy strip
  • In-wall energy twine and cable package (elective)
  • Mud masks
  • Protecting eyewear
  • Rag
  • Spacer for planks (elective; I used two stacked quarters)
  • Wooden filler
  • Twist ties

Step 1: In a well-ventilated space, whereas carrying a mud masks and goggles, minimize your shiplap to create six planks which are every 4 ft lengthy. These would be the seen planks above the field shelf.

Step 2: Minimize the pine planks into the next field shelf supplies. As soon as constructed, this field will relaxation just below the shiplap panels:

  • (Three) Four-foot items (for the highest, backside and again)
  • (Four) 9-and-11/16-inch items (for the edges and dividers)
  • (1) 18-inch piece (for the door)

Step Three: Resolve the place your twine holes will go and drill them accordingly with the bigger spade bit. If you happen to plan to make use of an in-wall energy twine and cable package, which helps to route coaxial cables and energy cords by the wall in order that they’re really invisible, then you definitely’ll solely want one gap in your unit instantly behind the place the TV sits. We wove our cords by the unit to an influence strip within the heart shelf then by two dividers within the shelving so it could attain an outlet.

This meant we wanted three spade bit holes: one within the high of the field simply behind the TV, one within the divider that connects the center part of the shelf to the proper part and one from the proper part out the facet of the shelf. We then masked the few inches of seen energy twine with a crate of additional blankets and throw pillows for aesthetic functions.

Step Four: Use the smaller spade bit to drill a finger gap within the high heart of the door.

Step 5: With a barely damp fabric, wipe the rabbet (the tongue-like edging) to take away any mud from sawing and sanding. Give this a couple of minutes to dry, then paint the rabbet along with your chosen paint shade so that you don’t must attempt to paint within the grooves after the unit is hung. I didn’t paint the grooves forward of time, however ended up wishing I had!

Step 6: Escape the sander and clean these surfaces! This helps the paint stick and retains the challenge wanting polished.

Step 7: Use the stud finder to find the studs in your wall and mark them with a chalk line or painter’s tape. Then, utilizing the scale of the unit itself, determine and mark its actual placement. We unfold our unit throughout three studs to distribute the load.

Step eight (Non-obligatory): If you wish to set up the in-wall energy twine and cable package, now’s the time to work on that. Observe the directions in your package to utterly disguise all coaxial and energy cables to your TV, cable field and consoles. This seamlessly integrates your electronics into the leisure unit, however due to the location of our unit and retailers, we might skip this step.

Step 9: Mark and drill pilot holes for the screws in your shiplap the place it’ll meet the studs. Be sure you lay your boards out within the acceptable course whenever you do that as a result of the screw holes will in all probability not be centered. Do the identical within the pine plank that may function the again of the shelf. I used two screws per board per stud for the shiplap and 4 cupboard screws per stud to connect the pine field shelf. After the pilot holes are drilled, use a countersink bit along with your drill so you may fill within the holes later with wooden putty to supply a seamless, floating look on the shiplap.

Step 10: Construct the field shelf! Use wooden glue and a clamp to affix considered one of your Four-foot pine planks with a 9-and-11/16-inch board at a 90-degree angle. Adjoin these with wooden screws, then take away the clamp. Use this similar method to connect the opposite two sides of the field shelf, wiping away any extra glue with a rag.

Step 11: Measure and mark the place your shelf dividers will go, then safe them in place in the identical method as earlier than.

Step 12: Flip the shelf front-side-down and securely connect the backing.

Step 13: Seize a companion to carry the shelf in place on the wall and, with the assistance of a degree, screw the shelf securely into the studs.

Step 14: From right here, stack the shiplap one plank at a time instantly above the shelf and screw by your pilot holes into the studs as you go. I needed somewhat extra groove seen than what was pure for this siding, so I used two stacked quarters as makeshift spacers within the grooves as I screwed the shiplap to the wall, however fence spacers would work, too. If you happen to do the quarter trick, use 4 quarters (two towards every finish) to make sure you’ve obtained a degree groove.

Step 15: Observe the instructions in your wooden filler to restore the screw holes and any joints you don’t need seen (just like the corners of the shelf portion). As soon as the wooden filler has dried, sand it down.

Step 16: Connect the door to the center portion of the shelf with two small utility hinges connected to the underside of the unit and a magnetic cupboard catch on the highest inside the door.

Step 17: Wipe away mud from screwing and sanding with a clear, damp rag. When the wooden has dried, use a curler to color the shiplap and a brush to get contained in the shelf. It’s possible you’ll want a number of coats of paint to cowl the floor evenly.

As soon as all of the paint is dry, the enjoyable half begins! Weave your coaxial wiring by the holes you’ve created in order that they’re invisible inside the middle field and behind decor on the open cabinets (twist ties can maintain further lengths in place), then fashion the cabinets to your style. Strive hanging a boxwood wreath within the heart of the shiplap or draping a banner between the highest corners. It is a good spot to simply swap out seasonal decor!

With all these distracting wires and units corralled and a deep charcoal body to camouflage your electronics, you’ll have extra alternative so as to add little touches of character to your dwelling space. Now decide a film, pop some popcorn and prop these ft as much as get pleasure from your model new floating leisure heart!

Julia Marchand is a lake dwelling, espresso consuming Mother who creates enjoyable DIYs that she writes about for The House Depot. Her DIYs all the time attempt to present an answer to an issue, like she did with this text— hiding coax cable wires. Go to The House Depot to see an array of coax cable choices.


Lindsay is the the Senior Supervisor of Media Engagement for Coldwell Banker Actual Property and manages the model’s media and social media division. She can be a licensed actual property skilled. In 2017, she was named a high 20 social influencer in the true property business within the annual Swanepoel 200 energy rankings.

Lindsay lives in Livingston, NJ along with her school sweetheart and now husband Joe and lately welcomed one other Joe into her life as she turned a mother in June 2016. Lindsay and her two Joes love spending their time enjoying with their cat Rory, watching sports activities and vacationing in Cape Cod.

Leave a Reply